To use CADY, all you need is to upload your Netlist and BOM files
CADY supports various netlist formats from all major ECAD vendors.
Please choose your ECAD environment below for an export guideline of the relevant netlist:
Nothing to Show – Choose Your ECAD Environment
1 Go to File -> Export -> Quick Connection View…
2 To export the netlist press OK. On a new project first configure as shown in the next steps.
3 Go to the “Display” tab and select as shown below.
4 Go to the “Advanced” tab and select “Filter” to be “None” and select the checkboxes as shown below.
1 Click the “Create Netlist” at the top.
2 Then on the following popup press “OK”.
3 In case of issues with the Netlist please verify that the settings in the “Other” tab are as follows.
1 While viewing any “.SchDoc” file, navigate to Design -> Netlist For Project -> Protel2
2 The file can be found in your project directory at “Projects Output For <project name>”
1 Navigate to File -> Export -> Netlist
2 Then on the KiCad tab select “Export Netlist”
1 Navigate to File -> Export -> Netlist.
2 Navigate to File -> Export -> Partlist
Note: Netlist file must have “netlist” in the file name and Partlist file must have “partlist” in the file name.
1 Navigate to Tool -> Forward Annotation -> Design Force.
2 Export .NDF Netlist files.
